Welcome to BRC Hobbies Call us on 0191 4887879

EMax Nighthawk 280 pro 10 Degree Inclined Motor Mounts

SKU: 400838
Sign up for price alert

Availability: In stock

Manufact: Emax

Product Description


These are the Emax Nighthawk Pro 280 10 Degree Inclined Motor Mounts.

These Tilted motor mounts help improve speed and visibility. When a multirotor is travelling forward the entire frame has to pitch forward, the greater the pitch angle, the faster the quad can go. The negative effect of tilting the quad in this way is increased drag which reduces the top speed and it angles the FPV camera towards the ground. This means the pilot cannot see where they are going. These Tilted motor mounts help to solve these problems by keeping the frame more level during fast forward flight.

The mounts are numbered one to four and must be fitted to their respective motor. Also, once fitted, you must make a small setup adjustment, otherwise the quadcopter will move forward when level. You can either run a new accelerometer calibration with the craft tilted so that the props are level, or tilt compensation can be set in the flight controller software.

* Tilt: 10 degrees
* Weight: 4g each

* 4 x Inclined Motor Mounts
* M2.5 x 8mm Fitting Screws

Additional Information

Additional Information

SKU 400838
Weight 30.0000


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.