Welcome to BRC Hobbies Call us on 0191 4887879

Multiplex Funjet Sports Jet Ready to Run Kit 264213

SKU: 403717
Sign up for price alert

Availability: In stock

Regular Price: £169.95

Special Price: £139.95

Manufact: Multiplex

Product Description


 Still popular with our customers as the perfect initiation to jet-type models; the Multiplex FunJet is an agile, easy-to-launch model which can take a wide variety of power systems. It is tailor-made for upgrading and is intended for intermediate fliers with aileron experience. The FunJet is controlled simply with throttle and mixed ailerons/elevator (delta configuration/elevons). Aerobatics such as rolls, inverted flight, loops etc. are well within its capabilities. Fast, low passes in formation with 3, 4, 5 or even more models look simply terrific - and the sound is marvellous! Chop the throttle and be ready for a surprise - the FunJet glides in wonderfully slowly under full control to a gentle landing.

*Very robust ELAPOR construction
* Removable canopy for easy battery swap
* Compact layout for ease of transport
* Screw-fitting motor installation, infinitely variable motor thrustline
* Typical jet-like flying characteristics
* Easy to hand launch, easy to land
* Smooth handling at low and high speeds
* Requires assembly (minimal building time)

* Wingspan: 795mm/31.5in
* Length: 730mm/28.75 in.
* Weight: approx. 550g / 1.37lb
* RC Functions: Elevons (Delta mix), throttle
* Colour: Unpainted white with decal sheet (included)
* Recommended battery: 2100 - 3200mAh 3S (11.1V) LiPo
* Target flier: Intermediate to Advanced

Kit Contents:
* Pre-assembled Model (Wings, Fins & Decals must be attached)
* 2 Multiplex Nano-S  Servos Installed
* Installed Himax HA2825-2700 Brushless Motor
* installed MULTI-Cont BL-37 Speed Control
* Color Decal Set

* Radio system: min 4Ch TX (with delta mix) and RX
* Battery: 2100 - 3200mAh 3S (11.1V)
* Glue: We recommend Multiplex Zacki - developed specifically for Elapor - or cyano & cyano activator (kicker) or alternatively UHU-por. If you use Zacki, you will not need kicker or activator. It is not possible to use white glue or epoxy.

Want to dazzle your mates? We stock a full range of RC Styro Elapor compatible paints (including fluorescents) to enable you to customise this (unpainted) white model and uniquely identify your plane amongst all the others buzzing around. A thin application of Elapor Primer will provide a good key for your spray job. Simply wipe the bare foam with a small amount of primer on a sponge or soft cloth. We found that a base coat of white, will enhance the final colour coat.


Additional Information

Additional Information

SKU 403717
Weight 2000.0000


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.