Welcome to BRC Hobbies Call us on 0191 4887879

GT Power C607D 1-6S 80W Balance Charger (Mains/DC)

SKU: 405448
Sign up for price alert

Availability: In stock

£34.95
Manufact: GTPower

Product Description

Details

The GT Power C607D charger is a simple yet powerful dual power (mains 100-240V and DC 10-18V) multifunctional charger with built in LiPo balancing (JST-XH) for 2S to 6S Lithium batteries. It is packed with features that exceeds many higher cost units. Primarily designed for Lithium Polymer (LiPo) batteries, it can also charge Li-Ion, LiFe (A123M1), NiCd, NiMH, and Pb (lead acid) batteries.

It has a high performance circuit with maximum output power of 80W and a maximum current of 7A.

This charger has a number of innovative features including the ability to measure battery pack internal resistance and per-cell internal resistance - essential for monitoring the integrity of the pack.

For example:
1.  Packs that are as good as new  will provide a reading between 0 and 5 milliOhm/cell.
2.  Packs that have been used dozens of times, but still feeling fairly good will provide a reading between 5 and 10 milliOhm/cell.
3.  Packs that have been used even more, and start to feel weak will provide a reading between 10 and 20 milliOhm/cell.
4.  Packs that almost won't hold your plane or heli in the air anymore will provide a reading over 20-25 milliOhm/cell.

At long last, you can now check whether your battery packs are up to flying your model before take-off; perhaps saving a costly crash!

This charger features optimised operating software that sets the input current during charging and discharging. Especially for Lithium batteries, the software detects overcharging which may lead to critical damage to the pack due to incorrect input parameters. The circuit is disconnected automatically when a malfunction is detected and the alarm sounds. All the programs of this product are controlled through two-way linkage and communication, to achieve the maximum safety and minimise problems. All the settings are user configurable.

Features:
* AC mains or DC powered
* Internal independent lithium battery balancer during charging and discharging
* Suitable for all lithium battery types - LiPo, LiFe, Li-Ion
* Fast charging and storage mode for lithium batteries
* Maximum safety using delta-peak sensitivity which terminates the process automatically if the voltage of the pack is exceeded
* Automatic charging current limit for NiCd or NiMH batteries
* Capacity limit
* Temperature threshold circuit (requires optional temperature probe (not included)
* Processing time limit
* Input power monitoring
* Automatic cooling fan
* Data store/load - 5 user programs available
* Cyclic charging/discharging (1~5 cycles)

Specification:
* Cell count: Li-Ion, LiPo, LiFe: 1 - 6S (series)
* Cell count: NiCd/NiMH: 1 - 15 cells
* Pb (lead/acid) battery voltage: 2V - 20V
* Input voltage: AC (mains) 100V~240V 50/60Hz
* Input voltage: DC 11-18V or AC TO DC adaptor/PSU (AC110/240 to DC 18V/7A)
* Maximum charge power: 80W
* Maximum discharge power: 5W
* Discharge current range: 0.1 - 1A in 0.1A steps
* Charge current range: 0.1 - 7A in 0.1A steps
* Balance circuit: 2-6S
* Current drain for balancing LiPo: 300mAh/cell
* Weight: 400g
* Dimensions: 136mm x 127mm x 56mm

What's in the box:
* C607D balance charger
* DC input cable (fitted with crocodile clips)
* Multi-charging cable
* Mains input cable with UK plug
* Instruction booklet

IMPORTANT notes on charger selection:
* Always select a charger that meets your actual needs.
* Always ensure that the maximum charge power in watts (W) will be sufficient for your needs.
* To determine the potential maximum charge rate for your battery pack, simply divide the maximum charge power of the charger by the full-charge voltage of your battery pack.
* A 50W charger with a 5A charge current theoretically, can only deliver 5A at 10V.
* An 80W charger with a 7A charge current theoretically, can only deliver 7A at 11.43V
* Efficiency losses (usually 20 percent) in the charger or the input voltage to the charger may reduce the charge current further.
* Setting the charge current too high and outside the capabilities of the charger is very likely to result in the charger overheating and potentially failing.
 
Theoretical examples using a charger with a maximum charge power of 80W
80W / 8.4V (2S LiPo) = 9.52A - making a 7A charge possible
80W / 12.6V (3S LiPo) = 6.35A (max charge current achievable)
80W / 16.8V (4S LiPo) = 4.76A (max charge current achievable)
80W / 21V (5S LiPo) = 3.8A (max charge current achievable)
80W / 25.2V (6S LiPo) = 3.17A (max charge current achievable)

Additional Information

Additional Information

SKU 405448
Weight 1000.0000

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.