Welcome to BRC Hobbies Call us on 0191 4887879

19g - 1600KV D2812-14 Brushless Motor

SKU: 409665
Sign up for price alert

Availability: In stock

£12.95
Manufact: Suppo

Product Description

Details

 This is an ideal, compact, light weight motor for planes weighing up to 8oz/227g and for smaller 3D/Aerobatic planes weighing around 6oz/170g when used with a 10A brushless ESC on 2S (7.4V) LiPo batteries in the 400~800mAh range.


This motor features a 3mm hardened steel shaft, dual ball bearings, integral prop saver for APC-E props and integral firewall mount flange. Note that the prop saver is sized for APC props. GWS props will need to be reamed slightly to achieve a good fit. The countersunk mounting holes have 31mm spacing.

BRC Hobbies Workshop Test Data 24/07/14

Model
LiPo Cells Prop in x in
Watts Amps
Max Amps
ESC Amps
KV rpm/V
Weight (g)
Dia. (mm)
Length (mm)
Shaft (mm)
A2204-14 2  GWS 7 x 3.5 44 5.5 7.5 10 1400 19 27.6 11.5 n/a
A2204-14 2
 APC-E 6 x 4
45 5.6 
7.5 10 1400 19 27.6 11.5 n/a
A2204-14 2  APC-E 6 x 5.5 53 6.85 7.5 10 1400 19 27.6 11.5 n/a

Please note:
The above performance figures are provided as a guide only. The actual performance of the motor may be degraded by incorrect timing of the ESC, battery quality, temperature, unbalanced propellor, poor installation, poor wiring and electrical integrity and also inadequate cooling airflow over the ESC heatsink.

Setting up:
*Brushless motors do not need to be ‘run in’. Do not run any motor on ‘bench test’ for longer than 20 seconds. The motor and ESC may get excessively hot causing damage to the power train components.

* We recommend using a WATT METER to check a new system to ensure that the manufacturer's recommended specifications are not exceeded.

YOU MUST confirm that the ESC program settings - especially the timing, are correct before running the motor.

* During the watt meter test, if the maximum current (Amps) is close to, or has reached, the maximum current for the motor before you have reached the full (open) throttle position DO NOT continue with the test. You should reduce the diameter and / or pitch of the propellor and retest

Warnings:
* Exceeding the motor specifications will damage the motor and / or ESC and battery. It is important that these components are set up properly. Failure to do so will void the warranty.

* We are unable to uphold the manufacturer's warranty if for any reason the motor has been modified, or used outside of the manufacturer's specification.

Additional Information

Additional Information

SKU 409665
Weight 100.0000

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.