£84.95 £50.00

DZ Hobby Yak54-50EP EPO Aerobat DZ-A389
[403268]

This is an impressive and well-designed Yak 54 aerobatic model constructed from super tough EPO foam which can be glued with foam-friendly CA & kicker. The foam has a smooth gloss-like finish which makes it more durable and streamlined than other foams used in model manufacturing.

This fully aerobatic model has many interesting features and suits a wide variety of power sets depending on your experience and expectations of performance and duration. A standard bent wire undercarriage is included

This version is part-built with much of the tricky work done. The fuselage is pre-painted with the wing tubes and the wood parts glued in place, including the motor mount - so the build is very quick indeed.

Designed for 4S to 6S (14.8V to 22.2V) LiPo with overall capacity ranging from 3000 to 4000mAh, the power requirements range from 800W to 1500W.The model is easily converted to IC but with all that oil and fuel residue flying about, you may want to consider applying a light-weight glass coat to seal the foam and joints.

With this "REALLY-almost-ready-to-fly" model just about everything is already completed for you. Simply install servos/receiver, motor, speed controller and battery, screw on the cowl, then mount the propeller. An experienced builder can be ready to fly in three hours!

Features:
* Semi Scale representation of this famous design
* Designed for electric flight
* High visibility colour scheme
* Easy access battery compartment
* Tough landing gear mount with resilient alloy undercarriage
* The wings are removable in a matter of a few seconds, for easy transport and storage
* Designed for 4S to 6S (14.8V~22.2V) LiPo
* Assembly required

SpecificationWingspanLengthFlying WeightRC Functions
 1420mm / 55.95in1340mm / 52.75in2200~2500g / 4.85~5.5lbail, ele, rud, thro


What's in the box:
* Airframe: Two-piece wing, fuselage with motor mount installed, tailplane, rudder
* Tinted canopy
* Bent wire undercarriage with light weight wheels, wheel pants
* Steerable tail wheel
* Hardware accessory pack
* Decal sheet
* Assembly instructions

Required:
* 800~1500W brushless motor + compatible ESC
* Prop: APC-E 12 x 6 - 14 x 7 (dependent on motor choice)
* Battery: 3000~4000mAh 4S to 6S (14.8V to 22.2V) LiPo
* Radio System: TX/RX min 4-channel, 4 x servos
* FF CA glue

Our recommended power set:
* Motor: Emax GT 3520-05
* ESC: Pro100A (stock no. 400218)
* Prop: APC-E 12 x 6
* Servos: 4 x MG996R (stock no. 406120)
* Servo extension leads: 2 x 600mm (stock no. 407743), 1 x 150mm Y-lead (stock no. 407726) 

Check out the video - click here

KIT SHIPPING: QUOTED SHIPPING COSTS FOR KITS ARE FOR SHIPMENTS WITHIN THE UK ONLY. IF YOU REQUIRE KITS POSTING OUTSIDE THE UK, PLEASE REFER TO OUR SHIPPING TABLES BY CLICKING THE LINK ON OUR HOME PAGE.

 

{SO}

{BB}

{DZ}

Reviews

Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Manufacturer Info
Other products
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg